Home / Guides / OWC overweight cargo in India

Guide · OWC

OWC overweight cargo in India: hydraulic trailers, HT-1 to HT-13 and axle-row limits

Heavy is a different problem from wide. Here's how India moves 100–500 t indivisible loads, which trailer compositions MoRTH allows, and what to photograph before the puller moves.

Updated 2 October 2026 · By the iCargoFinsure inspection team

242

inspections in 2025

2 days

P90 delay, worst 11

2,518

carrier concentration index

60.87%

of exposure on the top 10 routes

Explore the analytics →

What OWC means

Over-weight cargo (OWC) is a load heavy enough that an ordinary truck would breach legal axle or gross vehicle limits. Because the load is indivisible, the answer is not a smaller load but a bigger vehicle: a modular hydraulic trailer whose axle lines spread the weight so no single axle row exceeds what roads and bridges can carry. Many loads are both ODC and OWC — a 765 kV transformer, for example.

HT-1 to HT-13: MoRTH hydraulic trailer compositions

MoRTH's circular dated 27 October 2025 (superseding the January and June 2024 circulars) standardises online permission for single indivisible ODC/OWC loads on modular hydraulic trailers. It defines compositions HT-1 to HT-13, pulled by a three-axle tractor with ballast, and limits the load per axle row to 18 tonnes.

Composition

Axle rows

GVW

Arrangement

HT-1

4

72 t

—

HT-2

6

108 t

—

HT-3

8

144 t

—

HT-4

10

180 t

—

HT-5

12

216 t

—

HT-6

14

252 t

—

HT-7

16

288 t

—

HT-8

18

324 t

—

HT-9

20

360 t

—

HT-10

8 + 8

288 t

Turn-table bolster

HT-11

10 + 10

360 t

Turn-table bolster

HT-12

14 + 14

504 t

Girder arrangement

HT-13

16 + 16

576 t

Girder arrangement

GVW here is the whole combination — cargo plus trailer — so the trailer's own tare has to be evidenced alongside the cargo weight. Bridge-adequacy charts in the circular then decide whether a given span can take that composition.

Talk to a surveyor about this move

Leave your details and the iCargoFinsure team will get in touch about OWC cargo inspection.

iCargoFinsure platform: derived cargo model with volume, weight and centre of gravity (demo data)

CMVR axle validation — axle weight limits validated per configuration. From the iCargoFinsure app · demo data.

What to evidence on an OWC inspection

  • Weighbridge slip or manufacturer's certified weight, and the centre-of-gravity marking on the cargo.
  • Trailer configuration — number of axle lines, coupling, puller tractor and ballast, photographed and matched to the permit.
  • Hydraulic suspension grouping (3-point / 4-point) and level deck before departure.
  • Saddles, cribbing and welded stoppers under the load.
  • Lashing count and capacity; iCargoFinsure uses IMO CSS Code Annex 13 defaults for MSL (e.g. chain, wire rope, web sling) when the rating isn't stated.
  • Route survey and bridge clearance letters for the corridor.
The ODC/OWC checker gives an indicative axle-row count and HT composition from cargo weight and estimated tare.

How iCargoFinsure handles OWC

When the cargo weight (normalised to kilograms) exceeds the 40-tonne screening threshold, the rules engine raises an advisory softlock. It does not block the maker from submitting — only missing documents or zero dimensions do that — but the verdict and reasons are saved onto the inspection and shown to the checker at review. If a permit changes after an override, the job is flagged for re-verification rather than silently passing.Go deeper

Frequently asked questions

What is the maximum load per axle row on a hydraulic trailer in India?

MoRTH limits the load per axle row of a modular hydraulic trailer to 18 tonnes for ODC/OWC permission on National Highways.

What is HT-13?

HT-13 is the largest composition in MoRTH's 2025 circular: 16 + 16 axle rows in a girder arrangement with a GVW of 576 t.

Is OWC the same as ODC?

No. ODC is about dimensions; OWC is about weight. A load can be one, the other or both.

Sources and references

  1. MoRTH Circular RW/NH-35072/01/2010-S&R(B)PT-2 dated 27.10.2025 — HT-1 to HT-13 load compositions and bridge adequacy.
  2. MoRTH Circular RW/NH-35072/1/2010 dated 24.01.2013 — OWC/ODC movement guidelines.
  3. IMO Code of Safe Practice for Cargo Stowage and Securing (CSS Code), Annex 13 — MSL of securing equipment.
  4. Industry note — hydraulic axle trailers, 18 t per axle
Not legal advice. Limits, circulars and permit processes change. Always confirm with MoRTH, NHAI, the state PWD/transport department and your route surveyor before movement.

Have a heavy move coming up?

See the inspection on one of your own shipments.

Book a live demo and we will walk through the limits, the evidence and the sign-off for a real load.