Home / Guides / Wind turbine blade transport in India

Cargo guide · Wind

Wind turbine blade transport in India: inspecting 80 m+ ODC loads

The longest loads on Indian roads are getting longer. Here's how blades move from Mundra to the wind belt, and what an inspection should capture.

Updated 2 October 2026 · By the iCargoFinsure inspection team

242

inspections in 2025

2 days

P90 delay, worst 11

2,518

carrier concentration index

60.87%

of exposure on the top 10 routes

Explore the analytics →

Blades now outgrow every road rule

Wind turbine blades are the purest ODC there is. India's largest blade in 2018 was about 63 m; today blades of 78.6 m and 80.5 m are made at Mundra, and a 91.2 m onshore blade is being readied there — roughly five times the 18.75 m length limit. Each one travels hundreds of kilometres to sites in Kutch, Rajasthan, Tamil Nadu and Karnataka.

How blades move

  • Extendable or telescopic trailers with rear-steer dollies to manage the swept path on curves.
  • Swept-path route surveys — removing and restoring signboards, dividers and street furniture is common.
  • Escorts and traffic management, often night movement on busy stretches.
  • Root-end fixture bolted to the trailer, with a tip support cradle and soft padding at contact points.
iCargoFinsure platform: five-step inspection with SOP photographs (demo data)

Route and movement controls — route survey, obstacles, escort and safe parking captured as evidence. From the iCargoFinsure app · demo data.

Talk to a surveyor about this move

Leave your details and the iCargoFinsure team will get in touch about wind blade inspection.

Wind blade inspection checklist

  1. Blade serial number and pre-transport surface condition (leading edge, trailing edge, tip) — photographed all round.
  2. Root fixture bolts torqued; tip cradle padding intact; no point loads on the shell.
  3. Permit, route survey and escort plan attached; eWay Bill vehicle type set to ODC.
  4. Rear overhang markings and lights; zebra markings and flags on extremities.
  5. Delivery condition photos at site before the blade is lifted to the hub.

How ODC OK PLEASE helps

Length alone trips the ODC softlock the moment the packing list is read, and the eWay Bill ODC flag is cross-checked independently. AI vision gives the maker a quick first pass on surface condition photos, so a dispute about a chipped leading edge has a time-stamped baseline. See also the ODC rules and the ODC checker.Go deeper

Frequently asked questions

How long are wind turbine blades in India?

Blades of around 78–80 m are in production in India, with 91.2 m onshore blades being prepared. All exceed the 18.75 m length limit and move as ODC.

What trailer carries a wind blade?

Typically an extendable blade trailer with a steerable rear dolly, sometimes with a blade-lifter adapter for tight terrain.

Sources and references

  1. News24 — India's longest wind turbine blade at Mundra
  2. Renewable Watch — Opportunities and challenges for Indian wind manufacturers
  3. MoRTH ODC/OWC movement guidelines (2013) and online permission circular (2025).
Not legal advice. Limits, circulars and permit processes change. Always confirm with MoRTH, NHAI, the state PWD/transport department and your route surveyor before movement.

Have a heavy move coming up?

See the inspection on one of your own shipments.

Book a live demo and we will walk through the limits, the evidence and the sign-off for a real load.